The Minion DHF is the standard by which all other aggressive mountain tyres are measured. The DHF incorporates ramped knobs for low rolling resistance and channel-cut knobs to increase gripping edges, giving straight-line control and precise cornering Specification The standard by which all tires are judged Best for Loose/Hard, Medium, Loose, Wet Cornering Control 1 2 3 4 Rolling Efficiency 1 2 3 4 Compound : 3C MaxxGrip Compound Technology Breaker : Downhill Casing / Butyl Insert Max PSI : 60 Bead Type : Folding Tubeless Tyre TPI : 60 Weight : 845g 3C MaxxGrip 3C MaxxGrip uses the softest rubber compounds to offer the ultimate in grip and slow rebound properties for unparalleled traction in downhill applications Butyl Insert An extra piece of butyl rubber that extends from the bead of a downhill tire up into the sidewall. The butyl insert helps prevent pinch flats, protects the rim from hard hits and adds sidewall stability Wide Trail Wide Trail (WT) construction optimizes the tyre’s tread layout and profile on today’s modern, wider rims. Traditional tyres are designed around older, narrower rims and can create an overly square tyre profile, leading to less than optimal performance. WT tires are optimized for a 35mm inner rim width but are proven to work over a range from 30-35mm inner rim widths, depending on the rider’s preference Tubeless Ready Downhill Tubeless downhill set-ups are a great way to shave some weight and spend more time in the bike park or shuttling hot laps on your local runs. Sealant-compatible rubber is used with the familiar Maxxis dual-ply 60 TPI downhill construction and butyl insert for support and rim protection in order to offer the benefits of increased grip and reliability. A Tubeless Ready bead securely locks to the rim and the foldable bead provides additional weight savings Technology: 60TPI Folding