The Praxis Works Brodium G2 Flat Pedals are lightweight, fully rebuildable alloy pedals built for strong grip and long-term durability. Their CNC-machined 6061-T6 aluminium bodies use a low-profile concave shape to support secure foot placement. A hollow chromoly steel spindle, Enduro bearings and adjustable steel pins make them suitable for demanding trail and gravity riding.Key Features and Benefits:CNC-machined 6061-T6 aluminium body: The precision-machined body combines high strength with a low weight of 362g per pair. Its premium machined surface also gives the pedal a clean finish while keeping the structure suited to repeated impacts and hard riding.Low-profile concave platform: The 115mm x 112mm platform has 3.5mm of body concavity and 7.5mm of effective concavity with the pins fitted. This helps position the shoe towards the centre of the pedal, which supports a stable and controlled connection under load.12 steel pins per side: Each pedal uses 12 rear-loading steel pins with pre-applied Loctite to help keep them secure. The wide pin layout increases contact with the shoe sole, while the M4 thread allows compatible grub pins to be fitted if a different setup is preferred.Adjustable pin height: The pedals include 48 pin spacers and 12 spare M4 pins, so pin height can be tuned to suit shoe choice and grip preference. This allows you to adjust how strongly the pins engage with the sole without changing the pedal body.Hollow chromoly steel spindle: The updated spindle uses heat-treated, high-grade chromoly steel in a hollow design. This keeps the axle strong while reducing unnecessary weight, and the 8mm Allen fitting makes pedal installation and removal straightforward.Enduro bearings and Igus bushing: Each pedal uses two high-load Enduro Gothic Arch bearings with four-point contact, plus one Igus bushing. This bearing arrangement is designed to handle loads from several directions, helping support smooth rotation and longer service life.The broad platform, deep effective concavity and adjustable pin system are designed to keep foot position consistent when control matters most. Riders can tune pin height to match their shoes, while the low-profile body helps keep the foot close to the axle. The fully rebuildable design also means worn internal parts can be serviced rather than replacing the complete pedal.The Praxis Works Brodium G2 Flat Pedals combine a strong machined alloy platform with adjustable grip and serviceable internals. They are a practical choice for riders who want a durable flat pedal that can be tuned and maintained over time.